How to Fix 0x800f0986 Windows Update Error?

Update is an essential requirement of our devices, but there are instances when the process of updating can accompany some errors.Currently, an error of 0x800f0986 is hindering users and if you are facing similar issues on your device, then obtain a resolve through below-written instructions.

Turn on the Service of Windows Update 

In case you intend to update or reinstall the driver, then you can opt to follow the below-mentioned guidelines.

• Hold the Win + R keys at the same time on the system to launch the Run section.
• After that, type ‘services.msc’ into it and then hit the Enter key.
• You should reach the Windows Update button and twice-click on it to launch the properties screen.
• Go to the menu of drop-down Startup type to choose the ‘Automatic’ option.
• You have to select the Startup option on the screen of properties.
• Now, click on the ‘Apply’ button and select the OK button to shut the screen.

Run Windows Update Troubleshooter

If the users are trying to run the Windows Update Troubleshooter, then they should carefully apply the given steps.

• Navigate to the search section of Windows 10.
• Thereafter, input ‘troubleshoot’ into it and hit the Enter key.
• You should select the Troubleshoot Settings, that will launch the Settings application as displayed straightly under.
• Go to the option of Windows Update troubleshooter.
• You have to select the button of Run the troubleshooter to launch the screen.
• Now, click on the option of ‘Apply this fix’ for anything recommended solutions.

Remove the Folder of Software Distribution

In case you intend to remove the folder of SoftwareDistribution, then you can opt to follow the below-mentioned guidelines.

• Go to the service of Windows Update and prevent it by holding the Stop option on the screen of Properties.
• After that, reach the taskbar and select the option File Explorer.
• You should launch this path: C: > Windows >SoftwareDistribution> Download.
• Hold the ‘Control + A’ keys at the same time to choose every content in the folder.
• You should click on the Delete option.
• Navigate to the service of Windows Update properties screen.
• Now, click on the Windows.

Reset Windows Update

If the users are trying to reset the Windows update, then they should carefully apply the given steps.

• Hold the Win + S keys at the same time to launch the Search box.
• Thereafter, input ‘cmd’ into it and hit the Enter key.
• Then select the Command Prompt and right-click on it.
• You should click on the ‘Run as administrator’ to launch it with elevated rights of the user.
• After that, reach the screen of Command Prompt and type these particular commands:  

• Net stop wuauserv
• Net stop cryptSvc
• Net stop bits
• Net stop msiserver
• Input the pursuing line into the Command Prompt and hold the Back key on the keyboard: Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old.
• You should type this command and hit the Enter key: 
• Ren C:\Windows\System32catroot2 Catroot2.old.
• Afterward, type these particular commands: 

• Net start wuauserv
• Net start cryptSvc
• Net start bits
• Net start msiserver
• Now, reboot the system.

Turn off Third-Party Antivirus

The 0x800f0986 error due to the third-party antivirus tools is causing to block cumulative updates. So, disabling the software of antivirus might solve the issue. Afterward, reach the system tray antivirus of the antivirus tool button to launch a context menu from that you should often choose a choice that will turn off the software.

Reset Windows 10

In case you intend to reset the Windows 10, then you can opt to follow the below-mentioned guidelines.

• Go to the Windows Search on your system.
• After that, input ‘reset’ and hit the Enter key.
• You should click on the ‘Reset t his PC’ to launch the Recovery section in the Settings.
• Go to the option of ‘Keep my files’ and click on it.
• Then click on the Next option to proceed.
• Now, select the Reset button to verify.

Jaxson Harry is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Microsoft products at office.com/setup.

Source Url: https://jaxsonharryblog.wordpress.com/2020/03/31/how-to-fix-0x800f0986-windows-update-error/

The errors on the windows store are increasing rapidly, and the users who are being troubled by it should seek a fix of it through the below-written steps. The process is hard, so read it carefully. So, here are the instructions to solve the 0x80d02017 Microsoft Store error code.

https://greatnorton.com/how-to-fix-0x80d02017-microsoft-store-error-code/

Turn off IPv6

In case you intend to turn off IPv6, then you can opt to follow the below-mentioned guidelines.

• Navigate to the start button on your system and right-click on it.
• After that, you should click on the Run button.
• Then input ‘ncpa.cpl’ into the Run section and hit the Enter key to launch the Network Connections box.
• You have to select the active network connection and click on the Properties option.
• Thereafter, unselect the box of ‘Internet Protocol Version 6’.
• You should click on the OK option.
• Now, reboot the system.

Reset Microsoft Store through PowerShell

If the users are trying to reset the Microsoft Store through PowerShell, then they should carefully apply the given steps.

• Press the Win + S keys at the same time on your system to launch the Windows Search.
• After that, type the ‘PowerShell’ into it and hit the Enter key.
• You should reach the Windows PowerShell and right-click on it.
• Then go to the menu of context and click on the ‘Run as administrator.’
• Afterward, type the command into the screen of PowerShell: Get-AppXPackage -AllUsers -Name Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml” -Verbose}.

Delete Third-Party Antivirus Tools

In case you intend to delete the third-party antivirus tools, then you can opt to follow the below-mentioned guidelines.

• Hold the Win + R keys at the same time on your system to launch the Run section.
• After that, input ‘appwiz.cpl’ into it and hit the Enter key.
• You should click on the listed antivirus tool from the screen of the uninstaller.
• Then go to the Uninstall button in the section of ‘Programs and Features.’
• Then go to the Uninstall button in the section of ‘Programs and Features.’
• You have to select the Yes button on any verification pop-up that prompts.
• Now, reboot the system, once uninstall the antivirus of third-party.

Deactivate the VPN

If the users are trying to deactivate the VPN, then they should carefully apply the given steps.

• Hold the Win + R keys at the same time on your system to launch the Run section.
• After that, type ‘npca.cpl’ into it and hit the Enter key to launch the Control Panel.
• Now, reach the VPN and right-click on it then choose the Disable button.

Reset the Windows Update

In case you intend to reset the Windows update, then you can opt to follow the below-mentioned guidelines.

• Hold the Win + S keys at the same time to launch the Search box.
• Thereafter, input ‘cmd’ into it and hit the Enter key.
• Then select the Command Prompt and right-click on it.
• You should click on the ‘Run as administrator’ to launch it with elevated rights of the user.
• After that, reach the screen of Command Prompt and type these particular commands:  

• Net stop wuauserv
• Net stop cryptSvc
• Net stop bits
• Net stop msiserver
• Input the pursuing line into the Command Prompt and hold the Back key on the keyboard: Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old.
• You should type this command and hit the Enter key: 
• Ren C:\Windows\System32catroot2 Catroot2.old.
• Afterward, type these particular commands: 

• Net start wuauserv
• Net start cryptSvc
• Net start bits
• Net start msiserver
• Now, reboot the system and shut the Command Prompt.

Jaxson Harry is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

How to Fix PUBG Lite Unreal Engine Error 0x887A0006?

The popular battle royale game, PUBG, is renowned worldwide for its amazing gaming experience. Its popularity reached such heights that it has its three counterparts as well. One such famous counterpart is the lite version of PUBG PC aimed to bring the same experience on a low-end device.

However, while playing it, you can face an error stating “unreal engine error.”If you are facing any such error, then obtain a resolve through the below-written steps.

Upgrade Unreal Engine

In case you intend to upgrade the unreal engine, then you can opt to follow the below-mentioned guidelines.

• You should launch the Launcher and go to the Library option.
• Then, you can see the Engine version at the upper left-hand side of the screen.
• If there is any update applicable, a ‘+add’ button will be there, click on it.
• Select the Add Versions option.
• You will see a prompt to install the fresh unreal engine version.
• Now, go to the update button and click on it.Then download the latest version of the engine.

Upgrade and Confirm Steam Files

If the users are trying to upgrade and confirm Steam files, then they should carefully apply the given steps.

• You should open the Steam client.
• After that, the client will be looking for an online server will begin downloading the newest upgraded automatically.
• Once updated, reboot the system.
• To confirm the Steam files, launch Steam.
• You should select the Games option.
• Navigate to the option of ‘View Games Library.’
• Go to the PubG game and right-click on it.
• You should click on the properties option.
• Reach the Local Files section.
• You have to choose the ‘Verify integrity of game files.’

Turn off NVIDIA GeForce Experience Battery Boost

In case you intend to turn off NVIDIA GeForce Experience battery boost, then you can opt to follow the below-mentioned guidelines.

• Go to the NVIDIA GeForce Experience and launch it.
• After that, select the Games option.
• You should turn off the Battery Boost.
• Now, reboot the game.

Modify Preference of Standard Graphics

If the users are trying to modify the preferences of standard graphics, then they should carefully apply the given steps.

• Navigate to the ‘NVIDIA control panel’ and launch it on your system.
• Thereafter, select the ‘Manage 3D settings’ option.
• Beneath the section of ‘Global Settings’, select the ‘High-performance NVIDIA processor’ option.
• Finally, select the Apply button.

Upgrade Device Driver

In case you intend to upgrade the device driver, then you can opt to follow the below-mentioned guidelines.

• Hold the Win + R keys at the same time on your system to launch the Run section.
• Thereafter, input ‘devmgmt.msc’ into it and hit the Enter key.
• Go to the device and right-click on the one you would like to upgrade.
• You should click on the option ‘Search automatically for updated driver software’.
• Now, select the Update driver button.

Turn off Firewall

If the users are trying to turn off the Firewall, then they should carefully apply the given steps.

• You should launch the Control Panel on your system.
• After that, select the ‘System and Security’ option.
• Go to the ‘Windows Defender Firewall’ option.
• You have to select the ‘Turn off Windows Defender Firewall’ option.
• Now, hit the OK button to apply the changes.

Kellie minton is an avid technical blogger, a magazine contributor, a publisher of guides at mcafee.com/activate, and a professional cyber security analyst. Through her writing, she aims to educate people about the dangers and threats lurking in the digital world.

How To Fix Potentially Harmful Software Detected Alert?

Window Defender is one of the best first-party antiviruses in the world, but it flags several flaws that hinder users. One of them is error codes, and nowadays the prevalent one is “potentially harmful software detected.”

Window Defender has been going under some issues that are causing it to show the unnecessary error. If you are facing any similar error related to a subsequent problem in your Windows Defender, then please follow the below-written guidelines to resolve it permanently. The subsequent process is a bit complex, so it is recommended to read the article carefully to avoid making any mistake.

Scan the PC with a Third-Party Antivirus or Windows Defender

In case you intend to scan the PC with a third-party antivirus or Windows Defender, then you can opt to follow the below-mentioned guidelines.

• Go to the Windows defender and launch it from the notification section.
• You should click on the Virus and threat protection.
• Then select the Advanced scan option.
• Navigate to the ‘Windows Defender Offline scan’ and click on it then choose the Scan now button.
• Now, the system will reboot, and the scan procedure will start.

Stick with Third-Party Antivirus and Turn off Windows Defender 

If the users are trying to stick with third-party antivirus and turn off the Windows Defender, then they should carefully apply the given steps.

• Hold the Win + I keys at the same time on your system to launch the Settings.
• After that, click on the Update and Security option.
• You should select the Windows Defender option from the left-hand side panel.
• Then select the ‘Open Windows Defender Security Center’ option.
• Go to the ‘Virus & threat protection field and launch it.
• You have to select the ‘Virus & threat protection settings’ option.
• Now, switch the toggle of ‘Real-Time Protection’ to disable it.

Turn off the Windows Defender in the Group Policy Editor

In case you intend to turn off the Windows Defender in the group policy editor, then you can opt to follow the below-mentioned guidelines.

• Navigate to the Windows Search section on your system.
• Thereafter, input ‘group policy’ into it and hit the Enter key to launch the ‘Edit Group Policy.’
• Then you should pursue this path: Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus.
• Go to the right-hand side panel and reach the Turn Off Windows Defender, then right-click on it.
• You have to select the Edit option.
• Click on the Enabled option to verify the changes.
• Now, reboot the system for them to take effect.

Through Registry Editor Instead

If the users are trying to fix the issue through registry editor, then they should carefully apply the given steps.

• Navigate to the Windows Search on your system.
• After that, input ‘regedit’ into it and hit the Enter key to launch the Registry Editor.
• You should select the Registry Editor and right-click on it and run it as an administrator.
• Then pursue this path: ‘HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows Defender.’
• Go to the right-hand side panel and reach the ‘DisableAntiSpyware’ DWORD and right-click on it then launch the Properties option.
• You should modify the value from 0 to 1.
• In case you can’t view the DWORD, reach the blank area and right-click on it, then make DWORD(32-bit) Value.
• Now, give a name it ‘DisableAntiSpyware’ and change the value to 1.

Harry Williams is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on webroot.com/safe and many other related topics. He is a very knowledgeable person with lots of experience.

Source : Windows Defender .